2025 Bush-Whacker® Flex-Wing Cutters HD-240

Information

2025 Bush-Whacker® Flex-Wing Cutters HD-240

Bush-Whacker’s 20-foot Flex Wing Brush Cutter allows for more acreage cut per hour – a truly efficient machine for large jobs. Dependable and capable of cutting anything 4" and under.

Hall Manufacturing provides a limited warranty of one year on any machine or component, and five years on any mechanical gearbox or gearbox component.

This warranty covers defective materials and workmanship on the complete machine. Limitations and exclusions apply.

Features may include:

  • 10 gauge deck.
  • Structural frame of the mower is 1/2" thick vertical T-Ribs.
  • 3/8" thick sides instead of 1/4" flat steel.
  • Gearboxes are mounted to 1/2" plates that are welded to the 1/2" frame members.
  • 8-bolt mounting on gearboxes boltheads are tack-welded to the bottom of deck so one man can tighten the nuts or change the gearbox.
  • Hinges – 3" by 4" tubing with grease fittings.

Photos

Highlights

  • Ocala, Florida
  • 2025
  • Bush-Whacker®
  • Flex-Wing Cutters HD-240
  • Available
  • Cutting: 1"-20" | for aircraft and implement tires: 1″ to 20″

Specifications

  • 2025
  • Bush-Whacker®
  • Flex-Wing Cutters
  • HD-240
  • Rotary Cutters
  • Divider: 275 hp | Spindle: 250 hp | 540 rpm or 1,000 rpm
  • It also features a 20 splined 1 3/4" input shaft, 2 1/8" output shaft on spindle boxes. | Shielded PTOs are made from the finest quality propeller shaft materials and needle bearing universal joints. Series 6;80-degree constant velocity main drive shaft, with Series 8 intermediate and wing driveshafts.
  • Three heavy-duty clutches with spring type adjustment and four friction discs.
  • 8 treaded laminated tires standard. Independent shock absorbing system for all-wheel axles.
  • Tip: 16,750 fpm
  • 10 Gauge
  • Cutting Capacity: 4" | Side Skirt Thickness: 3/8" | Blade Size: 1/2" x 4" | Blade Overlap: 7" | Rated to cut up to 4" diameter.
  • Cutting: 1"-20" | for aircraft and implement tires: 1″ to 20″
  • 20'
  • 244"
  • 216"
  • 101" | 111"
  • tires and single curtain chains: 5,710 lbs.
  • Safety Deflectors: Chain Guards | Tires: Laminated
  • Blades: 1/2" by 4" material, alloy spring steel, airlift design that free swing when encountering obstructions.
  • Cutting height: from 1" to 19". | Hydraulic: One cylinder controls height adjustments for center and wing sections. Hydraulic lift cylinders control the raising and lowering of flexible wings. The wings may be raised to 94 degrees above horizontal and lowered to 22 degrees below the horizontal cutting plane.
  • Mower: 1 Year Limited | Gearbox: 5 Year Limited